[HOW-TO][MIB II Unit][VCDS] Offroad display activeren

Maik

Voormalig Admin
Spritmonitor.de
4,962
437
198
Forummers,

Ik kwam deze tegen op het ross-tech forum, en heb ook al gezien dat enkele het al uitgevoerd hebben @GertJan. Ik zal er komende week even een officiële howto van maken, maar wou jullie dit niet onthouden.

Off Road Display - Instructions:
WARNING: VCDS users that have a HEX+CAN, or Micro CAN Cable please note that this tweak (and any tweaks) on MIBII units (address Hex5F) should only be implemented with Ross Tech software version 15.7.3 (or later).

REQUIREMENT: This tweak will only work on MIBII units that have SATNAV installed (don't bother trying if a SATNAV is not present).

Step 1. On Select Control Module screen click "Select"
Step 2. Select 5F-information Elect
Step 3. Go to step 4- Note: I've had reports from some forum colleagues that a security code was needed. If the adaptation channel settings in Step 5 are locked:
Step 3A. Go back to the Open Controller screen and select Security Access-16
Step 3B. Enter the magic number 31347 (if this doesn't work- exit RT software, wait a while with the ignition-on and try 20103)
Step 4. Select Adaptation-10
Step 5. Change the following adaptation channels:
• (81)-Car_Function_Adaptations_Gen2-menu_display_compass - set to active (default not active)
• (83)-Car_Function_Adaptations_Gen2-menu_display_compass_over_threshold_high - set to active (default not active)
• (41)-Car_Function_List_BAP_Gen2-compass_0x15 - set to active (default not active)
Exit the Ross Tech software
Step 6. Reset the MIB unit - press and hold the ON/OFF button on the infotainment unit for greater than 10 seconds.

Remember to do the last step- the tweak won't work without it! When the tweak is completed you should get these screens (in English if you are in an Anglo-Celtic country like USA)

G7BK2OY.jpg


bron: http://forums.ross-tech.com/showthread.php?5822-Activation-of-off-road-functions
 
Leuk heb dingetje! Had hem ook al gevonden en wilde hem posten Stick Out Tongue
Een van jullie een idee hoe je de ingestelde schermpjes kan onthouden?
Iedere keer als ik ze op de gewenste dingen heb gezet en de auto uit en aan zet staan ze weer terug op het standaard.
 
Volkswagen  Polo 6C R-Line  1.2 TSI 90PK - 160NM --> 147PK - 240NM - JDEngineering 
Leuk heb dingetje! Had hem ook al gevonden en wilde hem posten Stick Out Tongue
Een van jullie een idee hoe je de ingestelde schermpjes kan onthouden?
Iedere keer als ik ze op de gewenste dingen heb gezet en de auto uit en aan zet staan ze weer terug op het standaard.
Ik kan ze sowieso al niet veranderen op mijn Polo, zou toch gewoon moeten kunnen door te swipen op het scherm, niet ?
 
  AdBlock gedetecteerd
Wij snappen dat advertenties op de website niet leuk zijn, echter het draaiend houden van de website is helaas niet gratis. Wij hebben jaarlijks kosten aan de software licenties en het draaiend houden van de server. Wij zouden het erg op prijs stellen als je de ad-blocker wilt uitschakelen voor onze community zodat het voor iedereen gratis toegankelijk blijft. Voor nog geen 50 cent per maand kun je ook je account upgraden als je geen reclame wilt zien!